Site Safety and Health Officer/Quality Control Coordinator

Feb 08, 2019

Intuitive Safety Solutions has an immediate need for a SSHO/QA-QC coordinator for a project at the Ballard Locks that will last through 2019.  Some basic SSHO requirements are listed below.

Please contact Melanie Taylor at mtaylor@iss-safe.com if you are qualified, available and interested.

The contractor shall provide a Safety oversight team that includes a minimum of one (1) Competent Person at each project site to function as the Safety and Health Officer (SSHO). The SSHO shall be at the work site at all times, unless specified differently in the contract, to perform safety and occupational health management, surveillance, inspections, and safety enforcement for the Contractor, and their training, experience, and qualifications shall be as required by EM 385-1-1 paragraph 01.A.17 and all associated sub-paragraphs. A Competent Personal shall be provided for all of the hazards identified in the Contractor’s Safety and Health Program in accordance with the accepted Accident Prevention Plan, and shall be on-site at all times when the work that presents the hazards associated with their professional expertise is being performed. The credentials of the Competent Persons(s) shall be approved by the Contracting Officer in consultation with the Safety Office.

The Contractor Quality Control (QC) person [can be the SSHO on this project.]

Requirements include at least five (5) years of construction health and safety experience, EM 385.1.1 certificate, OSHA 30 hour card within the past three (3) years and documentation of at least 120 hours of health and safety training over the past five (5) years.  Please note that all training must be documentable via certificates or cards.  A current 1st aid/CPR card is also required.